As we all know, styrofoam engraving machines are generally equipped with high-performance spindle to play its role. Spindle can be used for high speed engraving, drilling and milling, drilling, etc. When the spindle of the foam carving machine rotates at high speed, a lot of heat will be generated. If the heat is not cooled in time, it will have a great impact on the service life of the spindle, and even burn out the spindle. The spindle of the foam carving machine has two main cooling methods, including water cooling and air cooling. But what kind of cooling method is needed for the spindle?

保麗龍雕刻機主軸的選擇。使用水冷主軸或風冷主軸更好嗎？許多需要購買保麗龍雕刻機的客戶將面臨這個問題。下面小編就對于這個問題進行解答：

The selection of main shaft of styrofoam engraving machine. Is it better to use water-cooled spindle or air-cooled spindle? Many customers who need to buy styrofoam engraving machines will face this problem. The following section will answer this question:

1.保麗龍雕刻機的冷卻效果。水冷方法采用水循環冷卻主軸。水循環后主軸溫度保證在40度以下，其冷卻效果遠優于水冷方式。

1. Cooling effect of styrofoam engraving machine. The main shaft is cooled by water circulation. After water circulation, the temperature of the main shaft is kept below 40 ℃, and its cooling effect is far better than that of water cooling.

2.保麗龍雕刻機的噪音。水冷主軸電機基本上沒有噪音，與水冷相比，風冷主軸電機噪音較大。

2. The noise of styrofoam carving machine. The water-cooled spindle motor has no noise basically. Compared with water-cooled spindle motor, the noise of air-cooled spindle motor is larger.

3.保麗龍雕刻機的使用壽命。水冷主軸可以通過人為因素延長使用壽命，如換水或使用工業水冷卻器，因此其使用壽命比風冷主軸長。

3. Service life of styrofoam engraving machine. The service life of water-cooled spindle can be prolonged by human factors, such as changing water or using industrial water cooler, so its service life is longer than that of air-cooled spindle.

4.保麗龍雕刻機的準確性。水冷主軸的軸向和徑向跳動基本上低于0.003 mm，其精度高于空冷主軸。

4. Accuracy of styrofoam engraving machine. The axial and radial runout of the water-cooled spindle is basically less than 0.003 mm, and its accuracy is higher than that of the air-cooled spindle.

5.保麗龍雕刻機易于使用。由于水冷卻主軸需要連接到水泵，因此需要一個水桶來保持水。它需要連接到水管。非常是在北方的寒冷冬季，水管容易結冰，這對于寒冷的冬天的顧客來說可能更麻煩。此時，風冷主軸更合適。

5. The styrofoam carving machine is easy to use. Since the water cooling spindle needs to be connected to the water pump, a bucket is needed to hold the water. It needs to be connected to a water pipe. Especially in the cold winter in the north, water pipes are easy to freeze, which may be more troublesome for customers in cold winter. At this time, the air-cooled spindle is more suitable.

在選擇冷卻方法時，建議考慮購買預算以及當地自然條件，如當地水資源，溫度和其他因素。當然，您也可以根據您的具體需求與我們聯系，以獲得建議。

When selecting the cooling method, it is recommended to consider the purchase budget and local natural conditions such as local water resources, temperature and other factors. Of course, you can also contact us according to your specific needs for suggestions.
關鍵詞：保麗龍雕刻機